Product Details:
Payment & Shipping Terms:
|
Product Description: | Double Layer Trapezoid And Glazed Roof Roll Forming Machine | Thickness: | 0.3-0.8mm |
---|---|---|---|
Shaft Material: | Material Is 45# Forge Steel | Dimension(l*w*h): | 9500*1550*1500mm |
Control System: | PLC | Speed: | 15-20M/Min |
Voltage: | 380V 50HZ 3PH | Weight: | 6.5T |
High Light: | trapezoid roof panel roll forming machine,glazed roof panel roll forming machine,trapezoid double layer roll forming machine |
Double Layer Trapezoid And Glazed Roof Roll Forming Machine
The double-layer roof calendering machine can make two different contour drawings on one machine, which can save more space and money than using two different machines.
Equipment Detailed Parameters:
1 |
Suitable Material | PPGI (235Mpa) |
2 |
Width of the raw material | 1250mm |
3 | Rows of rollers | 15 rows & 16 rows |
4 | Dimension | 7300*1550*1200mm |
5 |
Main servo |
7.5kw |
6 | Hydraulic station power | 11kw |
7 | Thickness of raw material | 0.3-0.8mm |
8 |
Productivity |
15-20m/min |
9 | Diameter of shaft | ¢75mm |
10 |
Voltage | 380V 50Hz 3phases |
11 | Frame | 350H steel |
112 | Middle plate | 16mm |
Application
The double-layer tile machine is economical and can combine two types of equipment into one. That is to say, it saves floor space, and the equipment cost of the double-layer tile machine is much lower than that of two single-layer machines. The profiled plate rolled by the double-layered tile machine is not only solemn and elegant, but also beautiful and novel. And the appearance is flat, the corrugation is uniform, and the utilization rate is high.
Advantage
Contact Person: Mrs. Tracy
Tel: +8618713641935
Fax: 86-317-2016816